Recently, K 2016 of the organizers issued a global plastics and rubber industry, the latest market report. The report noted that, as the material consumption continues to increase, plastic and rubber industry in the past few decades has also achieved great growth. From 1950 to 2015, the global plastics and rubber industry grew at an average annual rate of 8.5%. Even if the current growth rate did not reach 1950-1970 years, but since 2000, the global plastics and rubber industry has maintained an annual increase of 4%-5%. With the changes in the field of products and applications, the increase in different regions is not the same.

Where is the polymer material flowing?

Increasing population and living standards are the main factors driving the growth of global polymer materials.

The packaging of food and daily necessities has occupied the big wall of plastic application market.

Infrastructure and buildings also need to be used in the application of water, electricity, gas supply systems, insulation, windows and so on. In addition, the gradual expansion of the transport - including the development of private cars, trucks and aircraft, but also to promote the development of polymer materials.

Medical engineering is inseparable from the application field of polymer materials: if it were not for the safety and health of disposable plastic medical supplies, the safe use of medical equipment and diagnostic system, laboratory equipment and medical drugs will be difficult to achieve the quality standard of the!

And the current popular sports and leisure products more or less plastic or rubber as raw materials, so that the application of polymer materials in the world more widely.

In 2015, the European plastics processing Association (PlasticsEurope) released the report, pointed out that the global plastic production capacity has reached 3.22 tons. Among them, 2.7 million tons, is the polymer material, plastic products, and the rest of about 500 million tons of plastic is for production coatings, adhesives, dispersion, paint or coating.

Global rubber production and consumption has been close to 2 million 900 thousand tons, of which 1 million 200 thousand tons from the natural rubber, another 1 million 700 thousand tons from the synthetic rubber.

China and the economic development of many Southeast Asian countries, so that the Asia Pacific region to become the world's largest regional economic growth, the global plastics industry is also a positive response to the region. At the same time, Asia also produces about 49% of the world's plastic products.

Today, China has become the most important country in all areas of the polymer industry: according to data records, in 2015 China is responsible for the production of the global 28% of the polymer and about 33% of the global plastic processing machinery. China has become the world's largest plastics processing industry, contributed 28% of the world's production capacity, Japan 4%, other Asia Pacific countries contributed a total of 17% of the polymer production capacity.

European polymer capacity accounted for 18% of global polymer production capacity, the United States is 19%, which means that the two regions accounted for the global production capacity ratio has been reduced by a few percentage points. According to PlasticsEurope's statistics, the Middle East and Africa together contributed 7% of the world's production capacity, Latin America is 4%, the former CIS countries 3%.

In 2015, in terms of output value, China is the world's largest production country, it contributed 32.5% of the output value, followed by Germany is 20.7%, Italy is 7.8%, the United States is 7.2%. German machinery and equipment manufacturers still dominate the global market, which accounts for 22% of the world's exports, followed by China (15%), Japan (9%), Italy (9%) and the United States (6%).

In 2014, the EU's 28 countries in the plastic industry to provide 1 million 450 thousand jobs, a total of 6.2 small and medium-sized enterprises, bringing sales of 350 billion euros, the EU's trade surplus contributed 18 billion euros. These figures are compiled by the PlasticsEurope according to the data compiled by the European Union Bureau of statistics. According to these data, the European Union outside the most important plastic raw materials and plastic products export market is Turkey, China, the United States, Russia and switzerland. The most important non EU raw materials import countries are the United States, Saudi Arabia, South Korea, Switzerland and Japan, plastic products are mainly imported from the United States, Switzerland, China, Turkey and japan.

At the end of 2015, the world's annual production capacity of thermoplastic plastic close to 3.05 tons, which is the largest and most important areas of the entire polymer material industry. The 305 million tons of thermoplastic plastics, 90% above is from the standard plastic, and another 9% is industrial thermoplastic plastics and other thermal plasticity plastics such as high performance polymers, based bio degradable plastics, respectively, occupy the 1 per thousand.

In recent years, Lingke ultrasonic in lean production, technology research and development, product innovation and humanized purchase and service experience will continue to additional investment, to meet the arrival of a new round of economic boom lay solid foundation and contribute their own strength.